Products

IMG-20230529-WA0008-removebg-preview

Sikadur®-20 Crack Seal

  • Semi-elastic crack sealing
  • Low viscosity
  • High adhesive strength
  • Suitable in both, dry and damp conditions
  • No shrinkage
  • Repair floor tile joint for leakage treatment at wet room
IMG-20230529-WA0012-removebg-preview

SikaCim

  • Performs multiple roles of water reducer as well as waterproofer
  • Improves workability without increased water content
  • No added chloride thus not contributing to corrosion of steel
  • Convenient to handle since suitable for both concrete and morta
  • Required at a very small dosage, hence economical
Old-image

Sika® SealTape F

  • High elasticity
  • High breaking strength
  • Easy to install
  • Waterproof and watertight
  • Good adhesion to Sika® waterproofing products
  • Chemical resistant
IMG-20230529-WA0013-removebg-preview

SikaTop 107 Seal Plus IN

  • Easy to apply by brush or in thin trowel applications
  • No additional water is required to make the slurry
  • Pre batched components with consistent quality
  • Hand or Spray applied
  • Easy and fast mixing
  • Increased frost and salt resistance
IMG-20230529-WA0015-removebg-preview

SikaBond®-124 Instant Nails

  • Easy to apply
  • Rapid strength gain
  • Wide adhesion range
  • Rapid initial grab after flash off
  • All surfaces must be clean, sound, dry and free of oil,
  • Grease and surface contamination.
  • Light abrasion is recommended for improved adhesion
IMG-20230529-WA0025-removebg-preview

Sika® MultiSeal AP

  • Very easy to apply
  • Good adhesion to many substrates
  • Weather-proof
  • Self-adhesive
  • Resistant to UV exposure
  • Can be over-painted
Old-image

SikaCeram®-888 Design

  • Very good workability in horizontal and vertical surfaces
  • Easy application by trowel or gun
  • Waterproof and impermeable to liquids
  • Provides a smooth surface, easy to clean and maintain
  • Good resistance to chemical attack and steam cleaning
  • High mechanical resistance and good abrasion resistance
  • Very good adhesion to ceramic tiles, mosaics, etc.,
IMG-20230529-WA0028-removebg-preview

Sika Rustop 100 1Kg

  • Impervious anticorrosive coating to prevent ingress of water, chlorides and carbon dioxide
  • Excellent adhesion to steel, concrete and mortar
  • Good bonding for subsequent concrete or mortars due to cementitious base
  • Contains corrosion inhibitors
IMG-20230529-WA0029-removebg-preview

Sika Rustop 100 1Kg

  • Impervious anticorrosive coating to prevent ingress of water, chlorides and carbon dioxide
  • Excellent adhesion to steel, concrete and mortar
  • Good bonding for subsequent concrete or mortars due to cementitious base
  • Contains corrosion inhibitors
  • For structures under repair or rehabilitation the corroded surfaces rust must be cleaned
Old-image

SikaLatex® Power

  • Makes the mortar waterproof and reduces susceptibility to acids and gases, salt petre
    action etc.
  • Mortar with SikaLatex® Power shows extremely good bonding to bases like concrete,
    stone, brick etc.
  • Reduces viscosity of cement injection grout and improves bond of cured injected materials
SikaShield-removebg-preview

SikaShield® P22 PE IN 3 mm

  • It is reinforced with a hybrid composite reinforcement fabric and is flexible at 2 °C.

  • The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer.

  • The underside of the product has a burn-off film .

IMG-20230701-WA0001-removebg-preview

Sika Rain Tite I

  • Extremely Good bonding to moist substrates, extremely imporved mechanical, flexural , strength and abrasion resistance properties
  • Screen required with sikacim / Sika Plastocrete super to protect  waterproofing layer
  • Coverage : Approx 2-5% by weight of cement depending on type of application.
  • Available pack size : 250 g, 500 g, 1 kg, 5 kg, 10 kg, 20 kg and 200 k
Old-image

Sika CoolCoat

  • Algae and fungi resistant
  • Highly flexible and and vapourable permeable
  • Simple and fast application
  • Excellent adhesion to concrete, brickwork, corrugated asbestos, bitumen,asbestos cement
    sheet and metal deck
  • Ultra violet rays
  • Cross linking polymer gives excellent weather resistance and enhances service life
IMG-20230529-WA0034-removebg-preview

SikaLatex Power

  • Makes the mortar waterproof and reduces susceptibility to acids and gases, salt petre
    action etc.
  • Mortar with SikaLatex® Power shows extremely good bonding to bases like concrete,
    stone, brick etc.
  • Reduces viscosity of cement injection grout and improves bond of cured injected materials.
  • With substrates
IMG-20230701-WA0002-removebg-preview

Sika CemCrete

  • Durable and hard wearing surface on application
  • Easy to apply by brush, slurry consistency
  • Excellent bonding with most of the substrates.
  • Protects against water penetration, salt & carbonation
  • Non-corrosive to steel & iron
  • Vapour Permeable
  • UV resistant & Crack Bridging Property
  • Suitable for contact with potable water 
IMG-20230701-WA0006-removebg-preview

SikaCeram @ - 428

  • Anti-corrosive coating for steel and concrete
  • Sika® Rustop is cement bound synthetic resin modified 2 component coating for corrosion
  • protection on reinforcement and concrete.
  • Ideally suited to rehabilitate corroded reinforcement
IMG-20230701-WA0004-removebg-preview

SikaLatex Super

  • Multipurpose polymer and admixture
  • Good adhesion to most substrates
  • Improves abrasion resistance, limits wear and dustproduction
  • Reduces cracking in mortar and concrete
    Reduces water permeability
  • Increases chemical resistance
  • Reduces viscosity of cement and improves bond
  • Easy to use
IMG-20230701-WA0007-removebg-preview

Sikacim

  • Compatible with all varieties of cement including slag cement
  • Minimizes mortar and plaster rebound loss
  • Extremely economical per cubic meter of concrete
  • Reduces shrinkage cracks
  • Makes concrete and mortar watertight by reducing capillaries
IMG-20230701-WA0011-removebg-preview

Wood Shake Roof Repair

  • Improves abrasion resistance, limits wear and dustproduction
  • Reduces cracking in mortar and concrete
  • Reduces water permeability
  • Increases chemical resistance
  • Reduces viscosity of cement and improves bond
  • Easy to use
IMG-20230701-WA0012-removebg-preview

SikaLatex (Super)

  • Multipurpose polymer and admixture
  • Good adhesion to most substrates
  • Improves abrasion resistance, limits wear and dustproduction
  • Reduces cracking in mortar and concrete
  • Reduces water permeability
  • Increases chemical resistance
IMG-20230529-WA0016-removebg-preview

SikaCeram- 888 Tile Grout EP

  • Very good workability in horizontal and vertical surfaces
  • Easy application by trowel or gun
  • Waterproof and impermeable to liquids
  • Long open time for cleaning residues from the tiles with water after application
  • Rapid hardening without cracking or shrinkage
  • Stainless and colourfast
  • Good resistance to chemical attack and steam cleaning
Old-image

Sikacim

  • Compatible with all varieties of portland cement including
  • Slag cement
  • Minimizes loss of mortar due to rebound in plastering jobs, hence great ease of application
    and saving
  • Required at a very small dosage, hence economical
  • Improves water tightness to a great extent
  • Performs multiple roles of water reducer as well as waterproofer

SikaCeram®-125 Easy Fix

  • Easy Fix is a polymer modified, cementitious
  • normal setting, self curing, easy fixing floor and wall tile adhesive
  • For small, medium sized ceramic and vitrified tiles in residential environments.
  • Suitable for bonding absorbent and partly absorbent ceramic tiles to absorbent construction material substrates.
  • Indoor use. EN 12004: Classification C1T*.
Rust_remover_cum_passivator-removebg-preview

SikaCeram®-850 Design

  • Epoxy floor / wall tile coloured grout for joints 2–15 mm

  • SikaCeram®-850 Design is a 2-part, epoxy floor / wall tile coloured grout dispensed using a double side-by-side cartridge.

  • It has a smooth glossy finish which provides a durable chemical resistant surface for demanding applications and high cleanliness requirements.

SikaCeram®-50 Tilofix

  • Polymer modified cementitious floor and wall tile adhesive 

  • SikaCeram®-50 Tilofix is a polymer modified, cementitious, normal setting, self curing, floor and wall tile adhesive.

  • Typically used for small, medium sized ceramic tiles on floor / wall and vitrified tiles upto 4 square feet on floor in residential

SikaCeram225-removebg-preview

SikaCeram®-255 Large Tile

  • Cementitious high performance adhesive with no vertical slip and extended open time for large and thin tile applications (Formerly

  • SikaCeram®-255 Large Tile is a high performance cementitious improved powdered, floor and wall adhesive with no vertical slip and extended open time for fixing large ceramic tiles, vitrified tiles, glass mosaic and natural stone.

SikaCeram228-removebg-preview

SikaCeram®-288 Flex S1

  • Cementitious high performance deformable adhesive with no vertical slip and extended open time for thin tiles, large tiles and demanding applications (Formerly SikaCeram®-288 H)

sikaMonotop-removebg-preview

Sika MonoTop®-108 Water Plug IN

  • Rapid setting mortar for plugging water leakage instantly Sika MonoTop®-108 Water Plug IN is a ready to use, rapid-setting, waterproof cement mortar for stopping water leaks in concrete and masonry.

Scroll to Top